Could someone recommend a flexible trans dipstick?
|
|
08-21-2015
Could someone recommend a flexible trans dipstick?
08-21-2015
yeah the stock one. why you ask simple its give you the correct level if you put in an aftermarket one then the level will be way off
Originally Posted by Bio248
Originally Posted by Kilroy
08-21-2015
Do you happen to have a photo of a stock bent dipstick?
08-21-2015
This is something to be asked in chat or something. This shouldn't be a whole thread.
Originally Posted by Bio248
Originally Posted by Kilroy
08-21-2015
www. go to the junkyard .com it'll take you all of 5 minutes and you won't even need any tools.
08-21-2015
I have a flexible transmission dipstick tube, it came with the transmission I bought, so I couldn't say where you could get one. reading the transmission fluid level is pretty tough on that dipstick, not sure if I would recommend one.
08-21-2015
Isn't he looking for a transmission dipstick?
08-21-2015
yes but at least he can look on ebay for it
Originally Posted by Bio248
Originally Posted by Kilroy
08-21-2015
True.
08-21-2015
Srs?
08-21-2015
Unless you compare them you won't know.
08-23-2015
A few pertinent things left out...
make, model, year...
why hy do you think you need a flexible aftermarket transmission dipstick?
08-23-2015
tube from my 98 regal fit, only bent it maybe a 1/2 inch off the crossover.
08-23-2015
std lokar 4l60e dipstick setup, and YES you can shorten the teflon dipstick section at the handle to the length you need.
yes its a ********** to fill and read but it sits about 3-6" away from 1200* exhaust.
to make the level reading easier you need to rough up the glossy extruded teflon dipstick with some scotchbrite/etc.
the molded in crosshatch area is too glossy to hold a visible amount of fluid....
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
