How much should I expect to pay for a tune? 5° of knock at 11lbs full throttle on a 3.4 with headers 91 gas.
|
|
03-28-2015
How much should I expect to pay for a tune? 5° of knock at 11lbs full throttle on a 3.4 with headers 91 gas.
03-28-2015
see reptiles pcm sale. iirc they are 100 a pop.
you got headers of some type on there?
03-28-2015
Yeah I made a thread not to long ago about tuning I've contacted a tuner with HP tuners he's just a very busy person hopefully it gets done soon. I never thought about it but I might just swap back my 3.5 how much more power will I be seeing with a 3.5 kr free then a 3.4 with 5kr at WOT. What does WOT mean anyway? I see people using it for full throttle. Yeah I'm on speed daddy headers.Originally Posted by Scottydoggs
03-28-2015
if you get less or no KR with a 3.5 put that back on. less kr the stronger it is. when the pcm sees KR it pulls timing and the engine stops pulling as hard from it. this is the pcm trying to save the engine.
03-28-2015
Yeah I'll go ahead and do that in the meantime. By the way have you dyno'd your car? I might go for a similar setup as you just wondering on the power.
03-28-2015
no dyno for me. but its likely around a 50 hp gain from what others say those mods are worth.
did you clearance the firewall for the o2 sensor? if not your o2 could be hitting the firewall and causing the KR too.
03-28-2015
wot= wide open throttle. definately recommend pulleying up if there is any kr. more than 2 degrees of kr and the engine will pull timing. last time I saw I had 7 degrees of kr, my pcm pulled like 8 degrees of timing. less timing advance = less power
03-28-2015
when i had 8* of kr i was down to 6* of timing, down from 15* or timing at the time. but that craps over for me nowlol
03-28-2015
Wouldn't the check engine come on? I doubt its hitting though I'd have to check it out. Debating whether I should go with a cam or rockers. Staying at a 3.4, pump gas, non ic for a while. Just that one final mod
03-28-2015
a cam is better, rockers are a bit easier to install.
if you didnt bash the fire wall in some your o2 is hitting. put the car in rev, tap the gas holding the brakes. you'll likely hear it bouncing off the fire wall, it goes tap tap tap. i bent my o2 from it hitting the firewall. and was getting 9* of kr from it.
03-28-2015
I remember what we did was cut the thing where the o2 goes and welded it a bit more down before the cat.
03-28-2015
ok, so the up stream o2 has been moved into a clear area already? if so pulley up. if the kr is less or gone, run that way till it gets tuned, or you get a canned tune.
03-28-2015
a cam will make more power. you dont have to do an aggressive cam, I would do something like a VS or S1X. those cams do well on stock heads with 90 or 105 lb springs.
03-28-2015
In one of my tuning manuals i read that in some applications each degree of knock can reduce hp by as much a 5hp. I think it was from my old lasota racing ls1 guide.
03-28-2015
iirc its one degree of timing pulled per degree of KR. at least in the 3800 world. other cars maybe different.
and my car pretty much fell on its face when it had high KR. modded with a stock tune i had 4.3* and it still didnt give its all, now tuned it screams like a banshee lol
03-29-2015
I started getting a noise for the last couple of weeks in reverse, and my dogbone mounts and bushing are shot, I guess this will be my issue.
:4'' HAI\L67 HVTB\HV3\ER Rockers\WP underdrive pulley\Headers\cat delete\91 octane overkill incar tune.3.69 gears, Trans go shift kit.
03-29-2015
i got my headers off a montie, theres lots of room back there, but it could still hit.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
