Just the little motor thingy in the fuel pump
|
|
09-16-2014
Just the little motor thingy in the fuel pump
09-16-2014
should be a small hose clamped to it. all the pumps ive done have some sort of small easy clip as well to release it from its bracket.
09-16-2014
How do I get this
To go to this
This is what I have to work with
I want to get the pump from the white one ad put it in the other one
09-16-2014
looks like 2 screws. unplug it, and pull that line off.
most come apart with little thinking, id work on the canister you dont need. that way if you break something its not the canister you need and you can learn on it.
09-16-2014
The two screws arent on the other one though . Will this even work?
09-16-2014
not sure. grip and rip the one you dont need.
09-17-2014
Got this one out safely. I need the hose and fitting from this oneOriginally Posted by Scottydoggs
I cut this one and can't get that little part off.
I'm trying to be as cautious as possible so I don't damage this one
09-17-2014
that last hose looks like it just pushes over the nipple there.
with a pair of pliers twist the line back and fourth till it moves on the pump, then wiggle it off.
work on the one you cut first, twist it loose.
when you buy a new pump it comes with this hose new. so be careful if its brittle feeling.
09-17-2014
Lubricating oils wouldn't be a good idea would it?
09-17-2014
a little wd-40 cant hurt, dont flood it tho, like inside the pump.
pic of a new pump, the hose slips on the pump.
http://www.highflowfuel.com/i-521003...1997-2000.html not sure your year, but this looks close.
09-17-2014
Yea that looks like the one I have. I got the little piece off that was stuck on the new pump now I have to find the WD40 for the hose that im reusing.
09-17-2014
I can just buy a new hose if i need to right?
09-17-2014
not on its own. like i said that would come with the new pump, and local parts stores seem to no longer sell just the pumps kits.
work as easy as you can, twist it, then wiggle and pull up on it.
09-18-2014
This is gonna take hours............
I should start now
09-18-2014
How come there are no write ups or videos on this? Is it really supposed to be that easy ?
09-18-2014
this is why a new pump comes with the new hose. try a pick under the end, maybe it will loosen up some. it should come off.
09-18-2014
Well that makes sense...... Hopefully this will work........ I've tried a couple things but it seems to kinda rip it. I'll be putting a clamp over there areas where it's slightly damaged
09-18-2014
Wbody store or ZZP sells the corrugated hose part individually. http://www.wbodystore.com/air-induct...tank-hose.html
You know... In case it breaks.
09-18-2014
This is truly a life saver
09-18-2014
if fit tears you can try a parts store, or order and wait for the hose from wbodystore
this maybe a risk, but try warming the hose with a lighter, the heat should make it soft and let it come off. not to much heat, warm it slowly.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
