Browsing the forums, looking for a used hub and pulley (prefer ZZP, don't have plans to go past 300hp) for the M90 and/or a used aluminum water pump pulley. Figured I'd sign up and ask if anybody has one.
I'm an '86+ H-body fan, restored and modded the crap out of my '86 before somebody ran a stop sign and ruined the front end (blasted foreign drivers). Ran a 15.14 @ US 131 motorsports park with a 2.32s 60'; 2.25" LG3 exhaust with a 3" CAI and full P&P. My first car, now I've got plans for a garage queen 455 RWD build.
Now I've got a 1993 Bonneville SSEi, fresh install of an NIC cam and some other go-fast parts. Started out as a $400 parts donor for a '93 SE (now also L67 powered). Decided to cut and gut the rust, completely restored the unibody frame and cammed the L67 from the LeSabre. However, it's stuck with the R-12 AC compressor so the OEM belt routing doesn't work and I need a flat-faced water pump pulley as the SC belt just touches the bump on the OD of the face, it only took 6000 miles but I did finally chunk one... I love the idle on the NIC! Most people won't even try anymore when the light turns green so I'm going to have to be crafty from now on...
