Thanks.
Anything real expensive is oing to have to wait until I get back to work. I'm back to college full time right now. I'll probably do the tail lights for Christmas. Maybe I'll look into a performance chip for now. This one has had some positive reviews: Stage 2 Performance Chip
Also, I tied my halo LED's to the wrong wire. The halo's are on when the headlights are not (when the running lights are on during the day only), so I decided I will tie the halo's into my low beams. One thing that looks cool is that the halo's blink when I lock the car via the keyfob. I was thinking about combining the functionality of both by using a couple of diodes to isolate the circuit that is not on when the other circuit is on...but that would mean the halo's would be on during daylight. BTW, it was suggested to use 330 ohm resistors (1/2 watt) to limit the current going to the halo's so they wouldn't burn out. I found that the 330 ohm resistor decreased the brightness of the halo LEDS too much - by at least 30 percent. I used a 10 ohm resistor which barely decreased the LED brightness.
HG
