Thread: Hi im new here and need some help

Same exact procedure to get the side cover off. You don't need to worry about the wiring harness, valve body or channel plate. The soleniod is right behind the side cover.

http://www.grandprixforums.net/how-t...ess-54448.html

so all i have to do is get the trans down anuff to get the cover off and it will be right there and one more thing will i have to replace anything when i take the cover off?

Sorry i dont know how this really works my bad all im trying to do is see if anybody was able to help me and your post to me helped but i dont know how to take off the subframe and i wanted to know if i needed anything eles when i took the cover off when i put it back on like a gasket or if any transmission fluid would come out and i need to get more and i didnt know there was to shift solenoids tell i just read that there was because autozone only gave me one.

Hi again. So anyone that can help please. But as i put on before the problem i had with my car i put it all in and put it back together and i tryed to drive it and it still wont move so i put a tester on it and wrote the old codes down and then erased them so i could retest it but now the service engine light wont come back on and its saying no codes so if anyone can help please help.