|
|
01-16-2012
As long as you didn't hydrolock it, eveything on the block should be good.
You may want to take your heads to a machine shop and have them checked out to be on the safe side.
If you're interested in an L26 UIM and LIM I have a set. It won't warp like the plastic UIM the L36 does.
Originally Posted by W-Body Store
01-16-2012
yeah i took the heads in and there both shot getting a new set tomorrow frm a local salvage yard an getting them checked and probably a valve job
Last edited by dondon69420; 01-16-2012 at 08:18 PM.
01-17-2012
i got the new heads need cleaned up and probably a valve job done as for the push rods am i supposed to put each one back in the same slot it came out and the new heads didnt come with the ones that were in them there from two different cars a 96 bonneville and a 98 lesabre there all the same length so just wondering about that and are both the front and rear head identical let me know
01-18-2012
anybody?
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
