Saint Louis area GTP owner...Silver and plain but a beast on I-70
|
Stock beast huh...
Missouri, go figure...
No official racing yet Im still modding/tuning/dynoing...but I take out the occasional charger and once in a while...funny to see a douche on the highway try to pull off on me and i keep speed for a sec smile, wave and crank on'em.
BTW the only reason I ask is because unless its a base V6 Charger, your not stock, and you say still modding (implying you have mods already) and your Public Info states a 3800SC Stage 2 kit... so again... assuming...
ZZPerformance - Stage 2 Performance Package #
- ZZP 3800 CAI with 4" K&N filter
- ZZP 1.0 pcm
- 3.4" Modular pulley system ('04+ Grand Prix, & Monte/Impala SS comes with a 3.6" pulley)
- 658 supercharger belt
- ZZP 3" bolt in aluminized cat'd downpipe (bolts up to stock or 2.5" catback) with gaskets
- Autolite 104 spark plugs (set of 6)
- 180* thermostat and gasket
Note - '04+ Grand Prixs' and 04+ Monte SS/Impala SS are more prone to "Knock Retard", so they come with a larger pulley to keep it safe. All packages require 92+ octane gasoline. If not available, please contact us so we can adjust the pulley size specifically for your car.
This kit will give you about 40 HP.
How to begin mods to your 3800 car:
http://www.zzperformance.com/grand_prix/articles1.php?id=35
**** Now IF this is what you have... it does NOT offer headers in this kit. If you do NOT have headers, you need to take off that 3.4" pulley! Argue with me... you won't be the first. But when you're putting in a new engine, I will say we told you so. Its been proven, you're knocking, you need to fix that while you have an engine to fix. There is a sticky thread on proper proven tried and true modding to a 3800 and the order in which you need to go. ZZP thinks a downpipe will allow a 3.4" but scan your car, unless you have a godly engine that runs like Hercules, your knocking at WOT when your racing those chargers and you will at some point chip your pistons and then... you can build a motor proper.
Just sayin
My bad i went with the 3800SC stage3 kit full options for 99 gtp
....also in the process of placing a functional ws6 hood...and experimenting on dual induction system with dual air cones connected to the intake and hood. $2500.00 invested as of now(including labor)
- SLP “PowerFlo” Exhaust System
- Digital Horsepower Inc. v1.0 PCM.
- 3.25” pulley
- the upgraded Thrasher Modular Pulley System
- MSP Cold Air Induction System
- Goodyear Gatorback Supercharger Belt
- 180-degree SLP Performance Parts Thermostat
- IAT Extension
- 6 tr6 sparks
- Casper Volt Booster
- Electric Water Pump
- SLP Headers
Last edited by StarQuinn; 12-14-2011 at 03:14 AM.
I read the safe modding thread...and i will be modding accordingly just to be on the safe side. and yea base chargers, all monte carlos, all grand prixs, grand ams...95% of saint louis is stock so when you see my car you think its just the standard 200hp GT trim...thats what I meant about all the highway ass i've whooped. fastest cars ive beat has to be the 07 GP GT, 10 charger base, 07 monte carlo ss, mustangs 2008 and lower...I hate mustangs so i look for those owners on the highway.
Last edited by StarQuinn; 12-14-2011 at 03:21 AM.
That 3.25 is kinda small for the mods you have. I have way more mods than your car and i'm still rocking the 3.4" pulley.
Have you scanned this car yet? I bet you got KR out the wazoo unless that DHP tune is drowning your engine in fuel.
so how about i change it to 3.3...critism doesnt bother me..my goal is to beat this guys 2010 Mustang 5.0 and one of my boys Camaro ss1...Help and advise is very grateful
« Previous Thread | Next Thread » |
Tags for this Thread |