I have a bad abs wire harness on the right front wheel could use some help on replacing this. Should I replace the entire harness up to the abs module any tips on doing this would be helpful thanks for any help.
|
|
11-28-2016
I have a bad abs wire harness on the right front wheel could use some help on replacing this. Should I replace the entire harness up to the abs module any tips on doing this would be helpful thanks for any help.
11-29-2016
Where is it bad at? The plug at the hub side? Usually you can just cut it back enough to get clean wire, then soldier/heat shrink the connection and be good to go.
11-29-2016
Most breaks are in the first 9 inches of the plug. So go back a ways to where you can get a decent splice installed
Sent from my iPhone using Tapatalk
11-29-2016
Not sure where short is hub wires are ok. If I move any wires after that abs lights come on.
11-29-2016
Sounds good if I touch wires in that area the abs lights come on. thanks for your help
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
