Any one know the torque for the tie rod to knuckle nut.The factory nut has nylon on the threads of nut new one is a castle nut with cotter pin. Thanks for any help.
|
|
11-18-2015
Any one know the torque for the tie rod to knuckle nut.The factory nut has nylon on the threads of nut new one is a castle nut with cotter pin. Thanks for any help.
11-18-2015
The torque might/will not be the same now, because what if the holes do not line up for the cotter pin.
Just go real snug and make the holes line up.
11-18-2015
Thank you
11-18-2015
Got the specs from moog 22 ft lb. plus 120 degrees
11-18-2015
I do what five finger said. Get it as tight as possible, with the holes lined up. I tighten it down, then check holes, if it needs to go tighter, than it gets tighter.
), heated leather, autostart.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
