Printable View
I think I have read about it early on is this thread and a few people say the data in not transmitting but I hooked a jumper from the DLC to the #9 pin on the digital DIC connector and still nothing, I could possibly have a bad DIC. But thanks for the reply.
One thing when you go from gtp to gt or the other way, there is a mod. I am on my phone, when I get to a pc I will try and find the thread. It only has to do with the trac light. From what I read the flashing 0 is a data link issue. Could be bad DIC, just double check the wiring, most tap into the data link on the odb-ii connector, to be sure they got the right one. Most of this is what I read.Quote:
Originally Posted by natshr
I'm going from a gtp to a se and the traction control works and the light cycles on and off as I press the button and actually works at the wheel level, but Im starting to have to lean towards a bad DIC. But thnx for the reply, gonna hit the junkyard up this weekend and hopefully get lucky and find another
I know this is an old thread, but what color is the HUD display? the picture on page 6 I think showed it as green. Are all HUDs green and if they are do they look out of place with everything else being red?
Quick question - anyone know off hand what size the bolts are to remove the HUD? I'm headed to the junkyard tomorrow to pull one out of a car and the less tools I have to lug with me the better!
Probably 10mm
Sent from my iPhone using Tapatalk
Two clips in front, two 7MM in rear. They may also haxe T15 or phillips on the head as well. Pics included here:
http://www.grandprixforums.net/threa...9-GT2-shown%29