Thread: How to- Retrofit Projectors 97-03 GP

Should be a few days.

I'm working on finishing a second set. I didn't do enough adjusting for the first set and the beams are too crooked to just turn the hold down nut. They give amazing output but I know the crooked beams will annoy me. Another member is planning on buying them.

IMO they also look better than any other headlights available for GPs.

Great write-up. I had to cut out the bottom of the housing and seal with tape to get the solenoid to fit properly and not max out the height adjusters if using the 4.1 projectors. I also found it helpful to to find some rubber gaskets to help with the cross beam adjustment. Good job and you make it seem all too easy.