Thread: Raised Spoiler - Drainage Fix [*]

I just pulled my spoiler off, and the center rear bolt stripped out of the spoiler and then I dropped it INTO the spoiler, so now I will hear the rusty stuff and the bolt rattling every time I raise the trunk...). There was plenty of pollen and vibration damage to the paint, but no actual nasty rust (thank goodness). I ended up using an entire 1/2 oz bottle of touch up paint on the bad spots and there is the outline of the spoiler etched in the paint.

My questions: #1 Do I need to put a small amount of foam padding on the ends of the spoiler to prevent it from "dipping" at 70 mph if I put about 1/8" rubber washers in between the spoiler and the trunk? #2 Do I need to worry about the missing rear bolt, or should I rig something such as one of the butterfly lag bolts for sheet rock(plastic "wings" and stainless bolt, so rust is no issue!)?