Thread: Anyone know where to find a good racing seat/brackets for 97-03 Grand Prix?

Title pretty much says it. I've done some searching but came up dry. Couldn't find any on Corbeau's site either.

Thanks!

I got Corbeau GTIIs in my car and modified the stock brackets to work with them. If I remember later I'll throw up some pics.

Or just dig up my build thread. I think there's some in there.

Originally Posted by Sandman

I got Corbeau GTIIs in my car and modified the stock brackets to work with them. If I remember later I'll throw up some pics.

That'd be great! Especially if you can show a pic of the bracket if it isn't too much trouble. I am hoping to fab. something up.

http://www.grandprixforums.net/threa...eau#post803736

Page 12

Here is what I did and used.

I also used a stock bracket, Took off parts not needed. I used Kindorf channel, spring nuts and bolts. Then took some light weight sheet metal, painted it and used it to hide the bracket.

Does yours still slide?

Originally Posted by Sandman

Does yours still slide?

Yes. It's uses the lever on the sliders

That setup looks Bad@$$!! Maybe I'll just have to go the custom route as well. Plenty of spare drivers brackets at the local junkyard.

Originally Posted by 97AutoXVette

That setup looks Bad@$$!! Maybe I'll just have to go the custom route as well. Plenty of spare drivers brackets at the local junkyard.

THX!!

Just to let you know the rear channel is 1 1/2". Front is 3/4". Did higher in rear to make seat more straight then leaning back.

You can try to look for a base model with a manual drivers side slider assembly and start with that. I made a billet plate to bolt a Kirkey road race seat too the manual slider assembly.

Originally Posted by dezebe1

You can try to look for a base model with a manual drivers side slider assembly and start with that. I made a billet plate to bolt a Kirkey road race seat too the manual slider assembly.

Not a bad idea. I'll keep an eye out for one and maybe that is the route I can end up going with. Have to find out which seat I will go with as well. I liked the Corbeau I used to have.