Can anyone tell me. The diameter of the down pipe?
Getting ready to buy a no-weld sensor mount and forgot to measure it.
|
|
02-04-2014
Can anyone tell me. The diameter of the down pipe?
Getting ready to buy a no-weld sensor mount and forgot to measure it.
02-04-2014
Anyone? Anyone? Bueller? Bueller?
02-04-2014
Your sig says 3in downpipe.....
Or look up the turbo system you have and read the parts list and see what it's suppose to come with.
02-04-2014
Dam. I forgot about the sig. Of course, that description comes from the po, so, I guess I'm just trying to confirm.
02-04-2014
Do you mean the stock downpipe? I think it may be 2.25 in but I'm not completely sure. The 3 in ZZP down pipe really is 3 in, until the end where it bolts to the stock cat back. If it's a bolt in, it tapers to 2.5 in at that end.
02-04-2014
I think I deserve a "Fivefingerdeathpunch" :-(
02-04-2014
I meant the ZZP. I guess I better wait until I can measure the diameter where the mount will be placed.Originally Posted by nik12937
02-04-2014
For those of you with the AEM wideband, how far downstream from the turbocharger did you mount it?
02-04-2014
Supposed to be 36" from the turbo according to AEM. Anywhere in the DP will be fine.
02-04-2014
Another stupid newbie question. Is the resonator just for sound?
02-04-2014
Yup. Helps kill rasp/drone.
No real reason to get rid of it unless it's rusted through. Most people replace them with a glasspack as long and as big in diameter as they can get.
Though with the turbo, it shouldn't sound nearly as bad with it off.
02-05-2014
2.25...
Sent from my Galaxy Note 3
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
