|
|
01-21-2014
I'm trying to wire the lighting on the gauges and get the AeroForce to power up and down properly.
I have the "add a circuit" fuse holder to plug into the fuse box, but, I need help figuring out which slot to plug it into.
What say you gauge wizards?
01-21-2014
Use the radio fuse or a IGN fuse.
Make sure if there is a red jump on the back of the aeroforce, it needs to be removed to work with a 12v power source.
01-21-2014
Gonna go give it a try right now!
01-21-2014
Works like a charm! Thanks FFDP! (I bet that would hurt)
01-21-2014
BTW, ALL of the gauges require 12v. Is is ok to use the same fuse for all 3?
01-21-2014
You really shouldnt use the same one, it could overload the circut.
I use both the radio fuse and a IGN fuse for my gauges. That way both are on with key on engine off and shut off when I eiter turn the car off or open the door.
01-22-2014
Ok. I'll buy another "add a circuit" and separate them. Can't wait till they function properly.
Thanks for the help.
01-22-2014
3 gauges will not OL a 10amp fuse... Just sayin!
One (add-a-circuit) is fine, just make sure you chose a good ground point. The ground bar just by the brake pedal, is a good spot.
01-22-2014
Got the boost gauge lit up tonight!. Makes it so much easier to see.........
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
