There's a pulley in place of the A/C compressor on this car and I want functional A/C. Only the compressor was removed. The hoses are laying unplugged in place and the dryer is still connected in the system.
Assuming the worst, that the compressor released metal into the system, should the condenser and hoses be replaced when addressing this sort of issue? Not sure what happens when metal enters the system.
Obviously the comp, dryer and orifice tube need replacement. I'd feel better getting replacement hoses from a parts house like Autozone/Rock Auto to be safe.
So far: trans mount, motor mount, CV shaft, power steering hose, head light capsules. Needs a tie rod, possibly a rack.
