Will these fit? RIMS

[Unr3al]

Here is a link to some rims I found that i like. 17x7 Maxxim Ahead (Graphite) Wheels/Rims
If link wont open specs are:
SIZE 17x7
ET 42 (offset?)
PCD 114.3 (obviously bolt pattern, I know GP's have a 5 x 115 but seems to be general consensus that this size works)
HUB 73.1 (hub size is larger then GP hubs will this be a issue?)

Thanks for the replies

[Fivefingerdeathpunch]

They will fit fine.

The hub part is something you need to look at though.

If the size is alot bigger than stock you'll want to order a set of hub centric rings to make of the difference.

[Unr3al]

70.3mm Is the hub size for our cars, so a 2.8 difference. Not sure if they make rings that small. Just as long as a tighten lug-nuts in a star pattern I should be ok I would think, or am I wrong?

[Bio248]

You'll be good.

[Unr3al]

Ok good