So recently I go to get in my 98 gtp, and the interior lights stay and I have to pull the fuse it get it to go off. Anybody ever had this? Figure either a door switch or bcm maybe? Thats for the help.
|
|
01-17-2013
So recently I go to get in my 98 gtp, and the interior lights stay and I have to pull the fuse it get it to go off. Anybody ever had this? Figure either a door switch or bcm maybe? Thats for the help.
01-17-2013
Make sure the light adjuster knob isn't turned on...its on left side of the dash
Sent from my DROID RAZR using Tapatalk 2
01-17-2013
Well I doesn't do it all the time. Sometimes it dims away like its supposed, sometimes not.
01-17-2013
Maybe a bad dimmer switch...
Sent from my DROID RAZR using Tapatalk 2
01-17-2013
I doubt that its the switch, but I'm gonna get a wiring diagram
01-17-2013
Yea either that or a wire loose somewhere which would explain why setimes it stays onOriginally Posted by ls1racer11
Sent from my DROID RAZR using Tapatalk 2
03-16-2014
Did you have any luck figuring this out? I have a 2001 doing the same thing and am leaning towards the BCM since it even does it occasionally with the keyless entry and trunk lid along with a random combination of doors
08-22-2014
Experiencing the same issue... Also, after pulling the fuse, the lights will stay barely lit. They're LED's if that matters.
Anyone have any luck?
Last edited by BrandonHall10; 08-23-2014 at 12:22 AM.
08-23-2014
Just tried that. Dings with the door(s) open. Locks instantly with the door(s) closed. Also, could a bad door lock actuator be back feeding current to the courtesy lights?
08-23-2014
I ended up fixing mine after taking the door panels off to replace/test speakers. The door lock switch was broken by the previous owner so I fixed it and I had some bad connections in the passenger door and it has worked every time since, except when I hit the dimmer switch that one time a month later
08-24-2014
scan bcm for door switches working, usually its the drivers door sensor/switch
08-24-2014
Forgive me, I'm still learning. Wouldn't the DIC show the door as "open"?
08-26-2014
Now I"m thinking it could be my made in china LED's. I pulled just one of the 6 courtesy lights, and replaced with a standard 194 incandescent, and they all act like they should.
I'm going to replace all courtesy lights back to standard bulbs and see if that fixes my problem.
08-28-2014
Changed just one bulb back to incandescent, and all is well. Considering problem solved... for now.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
