Thread: Engine Removal...up or down? Tips??

Drop the sub frame or out the top.. Either way works

id think if your just pulling the engine, take it out the top. dropping the sub frame requires you to get an alignment when you put it back in.

out the bottom, your talking taking the axles out, the ball joints, un do the lines and wires for the trans, and abs unbolting the rack, dropping the sub frame bolts, then lift the car one way or another. plus all the same stuff to get the engine un done. so out the bottom for just the engine is twice the work in the end.

tips for out the top: you need to take the master cylinder off, ( for clearance) and the a/c compressor, ( unless its dry or you have it vac'ed out) the p/s pump is always cleaner to leave behind as well.

And the oil filter housing needs to come off to go out the top

I just pulled two out the top for my swap project. Honestly, I think it's easier to come out of the bottom, and it gives you a chance to clean everything up easier.

I was able to pull both motors (04 GT, 04 CompG) without removing the MC it oil filter. You will want to pull the A/C and PS pump though.

-Rob

-Rob

Rob..if you want what I think is the easiest way, search my user name and "E asy" without the space. Personally out the top to me for motor only is cake. Out the bottoom is more stuff, it's likely preference from your Ford days. Whether working on the ground or a lift, for me top for motor only is faster. No axles, trans fluid or alignment. Once motor is out..power wash and reinstall.

Scott, MC is when you pull the trans at the same time.

bill didnt you post a video up in this catogory?

Originally Posted by 99PGPGT

And the oil filter housing needs to come off to go out the top

NEED is a strong word. I haven't ever removed it to pull from the top. You just have to use a little muscle to shimmy it out of the way.

No vid... write up with pics.

I never take the filter housing off and never have issues with it.

wasnt like how to remve and engine in 30 seconds?

two hours..two hours.

Originally Posted by Explicit_Spade

NEED is a strong word. I haven't ever removed it to pull from the top. You just have to use a little muscle to shimmy it out of the way.

X2. I've pulled every motor out the top without removing the filter housing. It can get caught up if you aren't watching for it I have ran into that

Sent from my SPH-L710 using Tapatalk 2

I've swap out the top. I also own an H-body soooo

Justin..the W body filter adapter sticks straight out toward the passenger wheel. It's the furthest item from the block. Unlike the perfect H body where there's no worries. Perfect I say..perfect.