|
|
06-09-2012
For the first mod to my stock gtp i was thinking of getting SD headers
(STAINLESS SS RACING MANIFOLD HEADER/EXHAUST GRAND PRIX/GTP/REGAL/IMPALA 3.8L V6 | eBay)
I was thinking this would be smart since later on in the future i want to run a 3.4 set up, reading up alot on how kr is the biggest problem these cars run into.
Also, will this keep me free from kr on a 3.4 setup?
06-09-2012
Headers are a great first mod but you won't know if you can run a 3.4 without scanning for KR. I had to run modded 1.9's to get kr free on a 3.4 but i'm on a canned tune yet. I need a real tune and I could probably get a lot more out of it.
06-09-2012
Is the aeroforce the best/only option to check for kr on gtp's?
06-09-2012
No aeroforce isnt the only one, you could also get a Scangauge II from autozone for like $160.
06-09-2012
Which one is the best between the two?Originally Posted by al2000gtp
06-09-2012
Or if you have an android phone you can dl the torque app and buy a bluetooth to obd2 adapter and be able to scan for under $30
06-09-2012
aeroforce is the best.
06-09-2012
Which model? Interceptor? I looked on their website and it looks as if they don't support pontiac platforms anymore??
06-09-2012
Interceptor should still support our cars.
you'd need the PT series for your car.
You'd also need to wire switched +12V power.
06-10-2012
I have no clue how to do that or what it ultimately means so is their a write up?
06-10-2012
No idea. Start searching.
06-14-2012
How much horsepower will SD headers give me if the rest of the car is stock?
06-14-2012
10whp ish maybe
06-14-2012
headers are a flow mod, the car will run better since its not being suffocated by the stock manifolds, instead of gaining horsepower headers "unlock" 10-20hp the stock exhaust took away
06-15-2012
Looks like it supports the WBody just fine:
Aeroforce Technology Inc | Products - Interceptor Order
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
