Thread: Help please. Exhaust issue

i would just buy a replacement.

walker replacements are good.

or a factory replacement.

or even a 30in long glasspack will do the trick, it does exactly what a res does.

Glasspack x2

Glasspack x3

i made this res out of a glass pack, cost 20 bucks for the glass pack, 10 for a flange, and 10 to have the inlet/outlet tube cut off and a flange welded on. i went 32 inched for length.

if you have a stock EXHAUST you will have to have ie welded in place. my exhaust was all after market and was clamped in.

[IMG][/IMG]

on the car

[IMG][/IMG]

if you look up a walker res, it looks just like what i have made here, (they cost 100 bucks in hand.) and it sounds nice and quiet, like stock.

oh, and its a ton easier to just drop the whole exhaust from the cat back to the muffler/ or mufflers, (it hung up by rubber hangers, thats it) if you are clamped together, it your running the stock exhaust you may need a shop to cut the old one out and weld in the new one. some mom and pop shops will put in what you bring them others will not. the 2 shops i went to wanted 275 to replace my shot res. thieves!

this is how i got my shot res off. i cut 3 lines in the res outlet tube with a cut off wheel, just score it and pry the tube back.

[IMG][/IMG]

[IMG][/IMG]

i used to have a shop that was performance minded, they would do what ever you wanted to do, no questions asked. and they were fair with you price wise. now closed, bummer.

the 2 shops i went to, i asked if they could slap a glass pack in there instead of the replacement res, both told me we dont have anything like that here...i was like really? and left. i did buy the flange from one of them shops tho, so im thinking they just want to rape my wallet. and thats the only place i could find the flange, or the net, (pep boys and auto zone just dont carry flanges) but i'd rather have it in had to make sure it fits right.

oh i bought the gasket first for a stock res to cat, took that to the muffler shop and matched it up to the flanges they had, 2.5 inside diameter.

but if you let a shop take care of it all they should have everything in stock, maybe bring them the glass pack if they dont carry them.

shop around, and then shop around some more.

oh and none of that patch your muffler stuff works for any length of time, i did it to mine, and it lasted like 2 days, or till you jump on it, then is all loud again. waste of time and money in the long run.

I didnt even buy a flang I just cut pipe and flange off old res and clamped in into the new glasspack.

my stock pipe from the cat was not round, none of the factory pipes are where they have bends. so the new flange was a easy way to keep it simple. unless you do a U bend delete then the pipe would fit right.



you would need the u bend cut off and new pipe welded to the cat with a o2 bung installed.