Anyone got a write up one Power Steering pressure hose

[chevyy1212]

Cant seem to find one or any real info on it. Got any help guys

[dsmuts]

You'll probably have to lower the back of the subframe a little bit to get in there very good but a 18mm line wrench should be all you need.

[FordMan77]

I can't remember which one is the pressure line, but when I did my rack I was able to reach down from the top of the motor and get the top line loose, and then once it was out of the way I went up from the bottom and got the other one. Lowering the subframe would have helped but I got it w/o doing that. If I did it over, I would lower the frame, lol...

[copgtp]

yea, the pressure line feeds into the bottom of the PS pump. You MAY be able to get to the rack side of the line without lowering the subframe, but I dunno, it's pretty tight!

[FordMan77]

The pump side can be reached by removing the pass. tire and going through the wheelwell, I do remember that part for sure.