Cant seem to find one or any real info on it. Got any help guys
|
Cant seem to find one or any real info on it. Got any help guys
You'll probably have to lower the back of the subframe a little bit to get in there very good but a 18mm line wrench should be all you need.
I can't remember which one is the pressure line, but when I did my rack I was able to reach down from the top of the motor and get the top line loose, and then once it was out of the way I went up from the bottom and got the other one. Lowering the subframe would have helped but I got it w/o doing that. If I did it over, I would lower the frame, lol...
The pump side can be reached by removing the pass. tire and going through the wheelwell, I do remember that part for sure.
« Previous Thread | Next Thread » |
Tags for this Thread |