|
|
10-24-2011
Does anyone know where these are? I've replaced my blower motor resistor, and tapped on the motor but I still get no fan from any of the speeds. Really don't wanna replace the blower motor. Also what's the best way to make sure I'm getting power to it? Is it supplied from the resistor? Please let me know guys. Thanks
10-24-2011
I could guess from your screen name. But I'll make you say it anyhow.
Year/Model would really help
10-24-2011
Originally Posted by bps02gtp
i am having the same issue in my gtp. the dealership i bought my car from told me that its the resistor that is causing the issue. i am just waiting on the resister to come in and im gonna replace it and go from there.
10-24-2011
you could run a pos and neg to the blower motor and see if it runs.
10-24-2011
Yeah screen name says it all. 02 gtp. 98,200 miles. Isn't the power for the blower motor being supplied from the resistor tho? So all I would have to do is unplug the plug from resistor to blower and touch the terminals on the inside right?
10-24-2011
unless there is a short somewhere. It would at least tell you if your blower is bad or not. Unplug it and run one wire to pos the other to neg and it should run.
10-25-2011
Reason I asked is I recently pulled a schematic for an 02 for myself. As I have 3 and 4 only working. Ok. so 1 and 2 are probably the resistor and 5...well good ole 5 shows it going to a seperate power source and I've checked the fuse to be good. So I'll be looking at that schematic again..
10-25-2011
Wouldn't 3 and 4 be on the resistor too? Do u see relays on there? There's gotta be one somewhere other than where the common places are.
10-25-2011
Do you have power to the blower motor? Do you have power to the resistor in all positions?
10-26-2011
The red and black wire from the resistor going to the blower is what supplies the power right? Jw so I can test and see if I have power
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
