Running safe?

[kyleinkman]

hey thanks for taking the time to check this out.
im just wondering if im running all my mods correctly and safely, blue ive already used ur safely modding thread but i wanna double check

Mods:
pacesetter headers
3 inch pipe
catless
flowmaster super 44s
k&n Intake
Egr delete
Air screen in intake delete
flipped mounts
Cooler NGK plugs
NGK wires
3.4 pulley

[redlinepontiac]

looks right, have anyway to scan to see if your knocking?

[TheOtherNick]

remove the intake screen will cause issues.
3" pipe will be annoying
You need a good tune
k&n intake is a waste of money

[matt5112]

Did you scan?

Because none of that matters unless you scan and you've checked your AFR under various conditions.

[dpzelenak]

well then
i was gonna say something about scanning it but i got jumped..not just once but 3 times...damn

[kyleinkman]

the only scanner i have is a basic code reader, i was thinking of getting the tuned pcm from zzp any comments on it?

[matt5112]

Where in canada are you?

[redlinepontiac]

no zzp, go with overkill, 3800perf, or intense

[kyleinkman]

pembroke about 45 min from ottawa

[matt5112]

Ah true.

I believe there are a few guys trying to convince Will (Overkill) to come to Ottawa for a tuning weekend or something to that effect.

Might want to check out OQCGP.com for that.

Also put that screen back in, the flow increase isn't worth the inaccuracy in MAF readings.

[kyleinkman]

where r u from matt?

[matt5112]

Real close to Toronto.

[kyleinkman]

know any good parts sites that doest kill us canadians in shipping?

[matt5112]

Nope.

[blueguy]

My thread also does not recommend aftermarket mufflers, HUGE useless catback piping, and K&N FIPK's.

Make your own intake...less than $50.
Pacesetter's suck unless you plan on putting another $50+ in them to get them welded...buy Speed Daddy's off of EBay for less than $200 and have a new flex put in it. For the 3.4", hopefully your not talking press-on...because that's a nice paper weight...just get ZZP's MPS...and order a 3.6". Then you really wouldn't have to ever worry about scanning...there, I said it.

[matt5112]

My understanding is the list mentioned is what has been done.

[blueguy]

I thought he hasn't installed them yet, oh well...reading plays a huge part.

I b hypocrite.

[matt5112]

Its okay...

You'll read one day.

[blueguy]

I read that^

[Slick2500]

I would not run 3" strait pipes to flomaster 44's without at least a catback. I do not like the sound of flowmaster 44's on any car.
I'm thinking of going to a junk yard and getting the stock cat-back off one of the gps they have my car sounds so much like **** at WOT idle and cruising it sounds alright.