Found this theselinks today. Some very useful stuff. Anything from valvetrain geometry to intake flow rates to explanations of KR. all credit goes to ZZP unless otherwise noted in the article, and not me.
I believe these to be mostly accurate and are parallel to what I have been hearing members tell other members.
*Disclaimer* *dont believe everything you read on ZZP*
Series 3 HV3 intall
Penetrating Oils Compared
Belt sizes, routing and pulley diagram
Valve springs and retainers
Pushrod length and lifter preload
Intercooler pumps
R&D on the Walbro fuel pump by Dig Ken
FREE MOD: Ground Wire Upgrade
FREE MOD: Removing the Engine Brackets
FREE MOD: Larger oil filter
FREE MOD: Improving Throttle Body Airflow!
Mods You Don't Need
Intake Designs, Airflow Testing and Theories
How to Achieve Neck Snapping 60' Launches
About Knock Retard (KR)
KR - How To Fight?
U-Bend Replacement Test by Jim Wierzbicki
97 - 06 GTP Model Differences
Eliminating KR
Drag Racing Tips
______________________SMGPFC #99_______________________
