i got a aem uego im pretty sure it can read in lambda but i havent tried to change it. but mid 11's is what i try to run, my first couple were lean and fixing that took care of a good majority of the kr. but my shifts are horrible up to 7*
|
i got a aem uego im pretty sure it can read in lambda but i havent tried to change it. but mid 11's is what i try to run, my first couple were lean and fixing that took care of a good majority of the kr. but my shifts are horrible up to 7*
run high 10:1 afr if you are actually managing to read KR on E85....
I find it very hard to believe you are actually knocking in reality.... I have ran up to 28psi on 14:1 afr without KR.
Log misfires and see if it starts missing in that range it knocks, should be able to tell tho, what plugs and gap are you running now?
alright ill have to do that, i never hear of feel any knock. put right now i got al104's im not positive on the gap atm i believe its around .050
« Previous Thread | Next Thread » |
Tags for this Thread |