|
|
12-27-2010
i was just curious if there is any way to tell if the pcm isnt stock, i got my gtp about a month ago and from what i can tell its got u bend and res delete and i measured it tonight and it looks like a 3.4 but im not 100% because it looks just like a stock pulley
12-27-2010
measure it................
12-27-2010
Do your fans stay on after you shut the car off?
12-27-2010
nope not when turned off but i did notice they do turn on around 180
and i did measure it on the outside edge it was 3.5 so that was my guess that it was a 3.4 it just looks completely stock, and idk if it matters but performance shift on it doesnt seem like it makes any difference to me
12-27-2010
Originally Posted by shawnschuldt
You are correct. I believe the pullies are rated for diameter where the belt rides, not the overall diameter. So if you measured an overall dia of 3.5" it sounds probobable that it is referred to as a 3.4" pulley.
12-28-2010
some companys put a sticker on them saying what Tune it has. When I was doing canned tunes my ZZP pcm came back with ZZP 1.0 SS sticker on it
http://www.streetfire.net/video/2001...ynp_208097.htm
12-28-2010
yea ill have to pull it out and see if its got anything on it, its tough trying to figure out what someone has already done to it
12-28-2010
assume they havent done anything and redo most of it.
12-28-2010
Don't buy modded cars.
12-28-2010
that's good advise
12-29-2010
damn i was really considering buying your car... DAMN!
| « Previous Thread | Next Thread » |
