Okay well i have the headers here sitting next to me.. i was just wondering if i need to buy an o2 extension and if i do where do i buy it?
|
|
11-23-2010
Okay well i have the headers here sitting next to me.. i was just wondering if i need to buy an o2 extension and if i do where do i buy it?
http://www.streetfire.net/video/2001...ynp_208097.htm
11-23-2010
UGH i thought i ordered everything i needed great now i gotta wait another week!!
11-23-2010
did you get clamps and some rtv sealent
11-24-2010
yea i got all that and i was reading on here that you need the o2 extension.. so i gotta order that
11-24-2010
or just make one.
11-24-2010
Use the damn clamps they come with...who needs to take headers off again as long as they are done right?
11-24-2010
You can extend the harness thats already there. That's what Jay did for me.
11-24-2010
Thank you.Originally Posted by rynoman03
Get so length of wire about 14"
Solder it, heat shrink it, tape the **** out of it, and your good to go.
11-24-2010
Or.... get a bung welded in the crossover just behind the throttle body.
No extension required, no beating on the tranny tunnel.
This is of course assuming you bought Speed daddy headers.
11-24-2010
or get the o2 out of the grand am as they come with longer wires...thats what i did and never had a problem...also if you got speed daddies get new gaskets as speed daddies are wrong and are a headache and new ones at autozone are only $7
11-24-2010
If you ever have to pull the engine or heads.
11-24-2010
I just made my own o2 extension, it was easy and holds up fine. And I used all the clamps it came with and the gaskets and all. It's all fine. Just use a shiet ton of RTV on those slip joints to be sure. I have SD's as well.Good luck!
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
