Thread: Brake Rotor Question

Got an email back from Rotorwork...

"...the rotors are universal you can install them anyway you like depending on the style that you like..."

Nice link Warhellride, lots of good info. I'll check mine and see if they are vented a specific way but if rotorwork says they are universal I'm guessing not.

I also got this explanation over on the F-Body board from Joe 1320:
"They should be installed as in pic #1. The reason is so that the slots evacuate dust, debris, water and sweep it outward rather than channeling it toward the hub."

That makes perfect sense.

Thanks everyone for your help.