Thread: i'm confused about o2 simulator i bought from 3800performance

I bought an o2 simulator from these guys and i plugged it in and it cleared up my p0420 catalyst ineffeciency code on my 01 GP w/ a stock 3.1L. I scanned the car computer and it shows one of the monitors for the o2 sensor heater hasn't cleared. Doe's this simulator take care of the o2 heater as well? I'm confused. Here's the link for the simulator:http://www.3800performance.com/Merch...oduct_Count=14

the simulator only works for the rear o2 sensor. even then it will still fail eventually so its best to just run the rear o2 as well.

im a lil confused about why your trying to disable the rear o2 sensor. does your car still have a catalytic converter?

Originally Posted by Bio248

the simulator only works for the rear o2 sensor. even then it will still fail eventually so its best to just run the rear o2 as well.

yes the o2 simulator is for the rear sensor.

well then in theory, it sounds like your o2 simulator is bad. those "should" take care of ALL rear o2 related codes

put a defouler on the bung and then run a rear o2. should take away any of your problems.

Originally Posted by cbeebe1981

gpbastard, did everything clear up for you? i am having the same type of problem and I am trying to decide if I want to just buy the simulator or try to get an O2 sensor. I have an aftermarket Catco cat from Summit, so my fear is if I buy an O2 sensor it wont actually fix the problem.

yes, the simulator did work in keeping the CEL off. but with one stipulation if you have state emisions and that is that the O2 heater shows up on the scanner as a pending code even though the simulator keeps it from tripping the CEL light. hope this helps...

Originally Posted by gpbastard

yes, the simulator did work in keeping the CEL off. but with one stipulation if you have state emisions and that is that the O2 heater shows up on the scanner as a pending code even though the simulator keeps it from tripping the CEL light. hope this helps...

skip buying a new sensor unless the old one is bad. i have an aftermarket cat as well. put the money into the simulator instead. it seems that a lot of aftermarket cats trip the dreaded p0420 code (on foreign cars as well) even though they would pass an emisions sniff test. i'm in MN and we don't have emmisions testing...

Originally Posted by cbeebe1981

gpbastard, did everything clear up for you? i am having the same type of problem and I am trying to decide if I want to just buy the simulator or try to get an O2 sensor. I have an aftermarket Catco cat from Summit, so my fear is if I buy an O2 sensor it wont actually fix the problem.

you can pull out the rear O2 sensor if you want as well and plug it with an "O2 bung". i just left mine in place as it's not hurting anything and it saves you the hassle of taking it out...