So I just picked up a 1997 GTP (as I mentioned in other threads.)
I have the air bag and the ABS light on.
I have a code reader that can read SRS and ABS codes but when I try to read the codes it can't connect to either the ABS or SRS module. It reads the extended codes and scans the ECU just fine, just not the antilock nor airbag codes.
I know this code reader works, I tried it on my 09 Ranger and it was able to tell me why my ABS light came on the other day.
I've checked the 4 fuses related to SRS/ABS with an ohmmeter and they all test fine. I did notice though that the fuse tabs on the fuses themselves were a bit discolored.
I've also tried the app mentioned in another thread with my ELM adapter and it can't read them either.
I don't have a factory service manual for the car yet, is 1997 a strange year that needs a specific tool to read these codes? I know this car has had a wheel bearing replaced a year or so ago, and the light came on around then (that's what the PO told me.)
