Just remove the kick panel under the glove box, then the blower motor is held in with three 7 or 8mm screw/bolt heads. I might be off on the size but they are small.
Not very hard to replace at all, kind of a tight squeeze coming out though.
|
|
02-11-2017
Just remove the kick panel under the glove box, then the blower motor is held in with three 7 or 8mm screw/bolt heads. I might be off on the size but they are small.
Not very hard to replace at all, kind of a tight squeeze coming out though.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
