|
|
01-17-2016
Hi everyone, I'm trying to build a new intake for my GTP and have no idea how to actually attach the piping to the throttle body. I originally thought i would just use a coupler but after removing the stock intake tube i noticed that there is a weird "lip" that keeps it attached. I've seen people build their own intakes on here before but none of them seem to address this and I'm honestly clueless. Does anyone have any tips to get around this?
01-17-2016
Use still use a regular coupler and just a clamp.
Shove it on there, it'll be snug and use a clamp.
I bought one from home depot, they are thinner and after like 1 year the rubber was cracking. So I bought another for like 3 bucks. These ones have a metal shield around them, just remove it from the clamps and all is good.
01-17-2016
Okay, is that coupler just attached to the rim of the lip then? But it still holds well?
01-17-2016
yup. 3 inch rubber coupler clamped to the lip of the tb. home depot sells them for like 3 bucks in the plumbing pipe area, where you get the elbow from too. same area.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
