Both i believe the sd are 3" although it looks like it gets a little smalled towards the end so is it just a stock gasket i need and do i need to buy a new one or can you reuse the original?
Sent from my LG-D851 using Tapatalk
Printable View
Both i believe the sd are 3" although it looks like it gets a little smalled towards the end so is it just a stock gasket i need and do i need to buy a new one or can you reuse the original?
Sent from my LG-D851 using Tapatalk
They are 3" pipe that reduces to a 2.5" flange most of them are measure it to make sure I don't have SD headers and yes you need a new gasket.
Sent from my SM-G920V using Tapatalk
thats the only gasket from the headers you use.
Ahh ok cause i remembered you saying not to use the manifold gaskets so i went and bought some new felpro manifold gaskets but didnt even think about the dp gasket.
Sent from my LG-D851 using Tapatalk
Use the original metal manifold gaskets they are reusable and work the best Scotty talked me into it lol I got some from rock auto sealed up good
Sent from my SM-G920V using Tapatalk
But i already spent 15$ lol
Sent from my LG-D851 using Tapatalk
Take them back lol
Sent from my SM-G920V using Tapatalk
But its felpro! Felpro is amazing! Haha
Sent from my LG-D851 using Tapatalk
Yea I did the same thing as you I bought felpro I had them on my plog setup had issues sealing so I bought some oem ones when I just put my slp headers on. I almost bought sd headers but I got a good deal on some slp headers you might want to change the single wall flex on the SD headers they are known to leak I did the same on my slp headers because they come with a single wall flex
Sent from my SM-G920V using Tapatalk
Did you buy your crank pulley puller yet?
Sent from my SM-G920V using Tapatalk
Not yet ill probably order it tomorow
Sent from my LG-D851 using Tapatalk
ever hear of the free tool rental at most parts stores? why buy when you can borrow one?
Well thats what i though but then everyone said it needed to have special bolts and such
Sent from my LG-D851 using Tapatalk
Yea the bolts are special good luck with the parts store they have the puller but not the bolts
Sent from my SM-G920V using Tapatalk
http://uploads.tapatalk-cdn.com/2016...1c89e14827.jpg
Here's mine I just dug out
Sent from my SM-G920V using Tapatalk
if you buy a puller, you still need to buy the special bolts. free rental, buy the bolts, rip that pos off return the puller.
http://uploads.tapatalk-cdn.com/2016...adfa3da358.jpg
Good luck getting bolts that look like that lol
Sent from my SM-G920V using Tapatalk
It's a regular bolt... available at home Depot or lowes.. there's nothing special about them
So scotty can i just use a puller and then the bolts you gave me the specs for yesterday right?
Sent from my LG-D851 using Tapatalk
If you didn't live so far away I'd just ship this to you but shipping is ridiculous lol
Sent from my SM-G920V using Tapatalk