Quote Originally Posted by SinisterFootwear View Post
Take out the 2 bolts on each side of the console.

Put the gear selector into 2nd, then remove the screw from the shift knob, and take off the shift knob.

Pull up on the console from the back to disengage it from the hold downs. Then ull it rearward slightly until you see the electrical connector at the front of the console/under the IP.

Disconnect the wiring harness at the front of the console/under the IP.

Remove the console from the vehicle.

Disconnect the electrical connector from the HUD switch.

Remove the HUD switch from the back of the console.

Installation is reverse order.

Not sure about how to open the switch and fix it, but a new switch is about $20, so just replace it.
What's second I have p r n d m on my thing.

Sent from my SAMSUNG-SGH-I337 using Tapatalk