Finally got my father in laws car road ready. A long two months working on and off. Started out with only needing a right front brake line. Ended up doing that brake line 3 different times with a few unions, inverted with standard bubble flares, and unfortunately, a new abs pump. Father in law purchased a fitting with the wrong threads to go in that brake line spot on the abs pump, so the threads stripped out. Luckily, got a used abs pump from a local you pull it for $50. Tried bleeding it with a snap on solus ultra. Guessing the car doesn't support a manual bleed. So bleeding the pump and all 4 corners was time consuming. Now it just needs a pass. side tie rod, and carpet. But at least the mechanical side of things is complete.