Hey guys, so I'm gathering all my information for the l67 swap into my 95 GTP and I was wondering if I could keep my HUD or would I have to swap it from the donor? Also, can I use my information center or do I need to swap that as well?
|
Hey guys, so I'm gathering all my information for the l67 swap into my 95 GTP and I was wondering if I could keep my HUD or would I have to swap it from the donor? Also, can I use my information center or do I need to swap that as well?
Can't answer that question, but I can point you towards w-body.com they have a large amount of info on the older GP's.
Theres no bcm on an 88-96 gp. And you can run ANY 88-03 w hud without a bcm. I have an 02 gp hud in my 97 monte
dic - driver information center.
Obd1.5 is actually a misconception. On ur car you have an obd1 pcm and an obd2 style connecter. Only camaros and some trucks got obd1.5
If you can find a 96 dic, yes. Big if tho
That's the very definition of an OBD1.5. It's a bastardization between the older computer, and newer ALDL connector, thus why you have to find an OBD1.5 specific scanner in order to retrieve any codes.
That being said, what FFDP listed is all you need to make a HUD work. In fact, the HUD units themselves for the '97 - '03 are identical to the '94 - '96. Just a couple wires that need to be switched around on the harness, and you could make a newer one work right now.
It might help to take a look at the adding a hud how to threads. As mentioned, all the wiring going to a hud before 04 was analog except for the radio. I believe that was data.
There's a 97-03 hud in my 00 Regal.
Pwm?
« Previous Thread | Next Thread » |