So is it plug and play
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Printable View
So is it plug and play
Sent from my SAMSUNG-SGH-I337 using Tapatalk
On your 96 theres some wires youll have to change but its not hard to do :)
And the dic and stuff will work?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Yup youre still stuck with having to find a 96 dic though
I know, maybe in the future if I do the swap you can direct me how to do the harness, would the sub frame bolt straight in?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
You use your stock subframe. Mounts bolt right up :)
You do a hybrid pass side axle and use a stock 98-99 z34 driver axle. Or if you use a non hd tranny(like me) just use both axles from 98-99 z34
Ok how come the stock axles won't work, I was wanting to do it in a montana but everybody said swap subframes, seems like it being a 3.4 it'd be the same, I've also talked about the 94-96 and was told the same, wouldn't it be easier to just drop the whole engine, trans, sub frame and axles all together and just drop it in
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Different track width and the front mounts are different. Plus first gen ws have a better a arm and sway bar design :)
Who told you to swap subframes?
I can't find the post but my previous post people just said the subframes were a direct swap, guess they were thinking of taking the whole chunk out all together
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I dont know for sureon the montana but on a 96 gp they were pretty much talking out of their ass. There is a lot of fab in putting a gen2 w sub in a gen1, check out miko ks twin charged cutlass build thread on w-body.com, he used an impala sub. Theres no real reason to use the gen two sub, like i said same mounts and everything.
And i thought montanas had the same sub as a gen two, could be wrong tho
Ok so I'd just need motor and Trans and computer?
Sent from my SAMSUNG-SGH-I337 using Tapatalk
And of course the harness
Sent from my SAMSUNG-SGH-I337 using Tapatalk
And a bunch of lil odds and ends from a 98-99 z34. Dp, hp ps line, heater hoses, pcm tray(not needed but handy), fuel line extensions
Ok it doesn't sound to bad
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Nah its not bad..helps if you can find a good donor z34 in the jy :)
Reason i said grab a 98-99 z34 pcm tray is the l67 pcm wont fit your stock tray w/o hrinding the tray. I have a 98 z34 tray and the l67 fits perfect plus it bolts right in
Thanks for all your help
Sent from my SAMSUNG-SGH-I337 using Tapatalk