yeah, it was too big of an area to do with a touch up bottle and i dont have a gun, it came out really good after the third try lol just have to get rid of the overspray and buff it
|
|
06-24-2013
yeah, it was too big of an area to do with a touch up bottle and i dont have a gun, it came out really good after the third try lol just have to get rid of the overspray and buff it
06-24-2013
Can you post some pictures so we can see?
Nick C.
06-24-2013
06-24-2013
the scratch thats still there is from it being keyed, goes all the way across the driver side :/
06-24-2013
When I did my fender last night I just took some turtle wax polishing compund and put it on with a random orbital buffer. Got the paint to the point where it went from being dull to being shiny but still had swirls so I took some Blackfire polish for pulling out 2000 grit sanding marks and other stuff and threw it on a powercone connected to a drill and went at it until there were almost no swirls left.
If you do use a powercone on a drill then you need to be careful not to burn through the paint because it can happen.
Originally Posted by BoostenGTP
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
