On the right side, the part that fits in the channel, I had to shave the outer part cause it wasn't sitting right. Take your time and look at all the options.
Printable View
On the right side, the part that fits in the channel, I had to shave the outer part cause it wasn't sitting right. Take your time and look at all the options.
Alright . Hopefully I don't mess it up. Thanks for the helpQuote:
Originally Posted by TexasTanker19kilo20
Sent from my Galaxy S2 using Tapatalk
Your welcome. Oh and I used 3M double sided panel bond tape to mount them, very good stuff.
3M adhesive works great for holding trim, just get thick stuff and run one solid line all the way down the rail, then get it where you want it, peel part of it off and stick it down line everything back up and peel it the rest of the way and apply some presure, will hold better if you scuff the rail and the track first with 600, or red scotch brite
RALM
Sent from my Samsung Galaxy Stratosphere II
No need to scuff
http://www.findtape.com/product605/3...Fc6e4AodQ2cAfA
You can do it the same way puttng it on the track first but place the rail down and when your ready just move it over and peel the whole backing off then stick the rail down. Once again scuff for a better hold
RALM
Sent from my Samsung Galaxy Stratosphere II
Put the ctsv brakes on
http://i1272.photobucket.com/albums/...psc3b5c341.jpg
Holy Big Brakes Batman^^^
Did front brakes and rotors and rear struts on a friends 40th
I replaced my 4th clutch hub, PCS, and TCC Solenoid. (and used new thrust washers)
http://imageshack.us/a/img30/7150/b62c.jpg
http://imageshack.us/a/img845/3905/vt1z.jpg
http://imageshack.us/a/img94/7159/oiwi.jpg
http://imageshack.us/a/img14/1906/hzw4.jpg
http://imageshack.us/a/img69/4580/wayb.jpg
http://imageshack.us/a/img818/6229/1u8s.jpg
Oh, and also, I put the rest of my transgo shift kit in. 4th accumulator:
http://img594.imageshack.us/img594/9448/4kah.jpg
http://imageshack.us/a/img845/1622/zbvj.jpg
Transgo springs are the bottom 2.
^^^great job I would've unhooked that steering rack from the sub frame though before you dropped it. They can be. Pain in the ass getting lined up sometimes
I bought it some Valvoline Full Syn oil (5.1 quart jug) and a K & N filter for $23. I thought that was a good deal considering the oil is around $36 and the filter was $15.
Where u get that deal at?Quote:
Originally Posted by Below Average Joe
Advanced...I had a coupon that expired yesterday.
It was off. I removed both mounts where it connects to the subframe. It was pretty easy getting it back on, just needed a pry bar to move it while I felt where the hole lined up.Quote:
Originally Posted by 91parkave
http://img.tapatalk.com/d/13/10/04/durade3a.jpg
The beginning to my garage decor lol
Sent from my SPH-L710 using Tapatalk 2
Lolz and if you look it does look like a batarang, so your post has two meamimgsQuote:
Originally Posted by TexasTanker19kilo20
RALM
Sent from my Samsung Galaxy Stratosphere II
Trees down, 6-8" snow has fallen and still going. So I hid the car in the car port. Early hibernation I suppose.
Sent from my SCH-I535 using Tapatalk 4
It looks good....except that Michigan State clock.......Quote:
Originally Posted by rperry435
http://i97.photobucket.com/albums/l2...004_065909.jpgQuote:
Originally Posted by osiris94ej
http://i97.photobucket.com/albums/l2...004_070111.jpg
http://i97.photobucket.com/albums/l2...004_065900.jpg
Sent from my SCH-I535 using Tapatalk 4