|
|
09-07-2013
so i think i finally figured out how to corner hard and compensate for the heavy front end, and coming out of the corner at a speed greater than the entrance speed.
also noted tonight.
my abs system doesn't work when/as well as it should.
aka shouldnt be able to lock up the front wheels at 50mph.
thankgod for having a decent braking technique, or else i'd be in jail for vehicular manslaughter because some dumbfck decided 12am is a goodtime to walk down the middle of the road.
09-07-2013
Changed my front turn signal bulb. Went a few months with it partially working. Sometimes it would, and sometimes it wouldn't. If it flashed real quick(meaning it's not working), I'd leave it flashing and go out and hit it. That would reconnect the filament and it would work for a while. Just recently I attempted it for like the 4th time, but it wouldn't work anymore so I had to go out and buy a bulb. $6 for two bulbs at advance... a little pricey.
09-08-2013
Put a blower motor resistor in the Red 02 GP
09-08-2013
Check your supercharger bypass valve. It's the little plastic canister on top/front of the blower.Originally Posted by jerZcavy4120
Last time I had a stubborn P0171 code that wasn't solved by replacing the MAF, I found out that the valve had split in two somehow.
A zip tie later, the thing has worked properly ever since.
09-08-2013
Stiffer rear end than front, let it swing, then lock it in with throttle?
09-08-2013
Got home for a long drive and left it running while looking under the hood. I was just checking trans fluid level and then I noticed air started blowing past me, so I look and just my right cooling fan came on low. The left fan was not spinning. I knew the temperature was only at 200° 30 seconds before, so why would the fan come on? I checked the dash and it was at 203°, when I thought they came on at 212? And I didn't know one would come on and not the other. I've checked my dash gauge with my scan tool and the readings match up exactly when at 200°. I also checked both of my cooling fans by applying power straight to the fans and both worked. Anyone know why it did that? A/C was not on.
09-08-2013
Just detailed it inside and out. Thats all.
09-08-2013
Eyeballing the Overkill Motorsports site. Might get a tune for the GXP. DoD turned off of course.
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
09-08-2013
Http://www.grandprixforums.net/start...-37-72928.html started tear down of the 01 motor that I have for my build motor, .I'm going to start switching over all my personal items from the 97 body to the 01 body im going to be posting alot of update pictures in my thread it should be a fun next two days off work.
09-08-2013
I have been looking as well... Having a hard time pulling the trigger
Sent from my Samsung Galaxy Note II
09-08-2013
Get the diablo unit you will have a way better investment and be able to make your own adjustments with no downtime. Plus you can datalog if you choose to get tuned further.
09-08-2013
^^^I want that. But it is Soo much more than I am willing to spend for a tune.
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
09-08-2013
300?
09-08-2013
Rly? Thought it was closer to $500. Hmm.
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
09-08-2013
Was driving home on a 4 hour drive and my car started to slowly shake and get worse and worse... Then it was bad the rest of the way going home, I do need an alignment but it shakes worse at about 40-60 mph, I got home and only on the driver front wheel, the inside behind the spokes of the wheel and on the strut there are spots of black goo, I'm not sure what it is, anyone have any idea why it would slowly start to shake and what the heck that goo is?
09-08-2013
CV axle?
09-08-2013
I had a feeling it could be an axle but where would all that black goo come from? It's only on the driver wheel
09-08-2013
There is grease inside the boot. If the boot tore it would fling the grease everywhere.
09-08-2013
Not at all, it was only a year or 2 old it looked fine the day before.. when I put ps fluid in I squeezed that hose and it was fine
09-08-2013
Changed heater hoses, a split lower oem heater hose was nasty to change. Pissed cause
1. Someone mixed up clamps and small clamp on lower larger hose on heater core was next to impossible to get off- tight spot
2. Only small temp light on dash came on, no warning chime or light on HUD. Glad I had smelled it.
3. Car ate a 5/16 socket when I removed lower rad hose to flush
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
