What did you do to your Car today?

haha i tore my engine down today found out cylinder 1 took quite a beating, i blew a hole in my piston and it melted to the side of the cylinder wall. The guy i bought it from actually had pistons from a 3.8 non supercharge engine, on my 3.8 witch is a 350hp plus engine with a competition xp hot cam, 105lb valve springs, ported heads, 3.1 sc pulley pushing 10psi boost. The motor leaned out my spark plugs were white he obviously had no idea what he was doing with more air you bring in you need to have the fuel to keep up im not to sure what imma do for that i know the stock injectors are only good to 310-320hp so im ordering bigger injectors im not sure what all id need is anyone else having leaning issues?

im also replacing the pulley for a 3.4 hopefully that slows the blower down a bit i shouldnt be running that much boost with the cam im guessing?

Quote:

---

Originally Posted by geiger92

im also replacing the pulley for a 3.4 hopefully that slows the blower down a bit i shouldnt be running that much boost with the cam im guessing?

---

I was under the impression that a smaller pulley makes the supercharger spin faster...

Sent from my HTC Glacier using Tapatalk

Here's the fuel filter for the returnless versus the return style fuel system. Converterd my 04 to return style for more ease of use with traditional return modded rails and pumps.

http://farm7.staticflickr.com/6239/7...2e40b760_b.jpg

Grabbed a split rear fold down back seat from Picknpull out of an 01 LS today for my GS

http://farm7.staticflickr.com/6048/6...9141fd83_b.jpg

It cleaned up pretty nice. Need to hit it again with some leather cleaner though to really get some gunk off.

Quote:

---

Originally Posted by mrlogic1234

I was under the impression that a smaller pulley makes the supercharger spin faster...

Sent from my HTC Glacier using Tapatalk

---

Hes going from a 3.1 to a 3.4

Realized I am about 700 miles over due for an oil change. Whoops

Quote:

---

Originally Posted by danielle15

Realized I am about 700 miles over due for an oil change. Whoops

---

Somebody needs a spanking :th_king-evil:

just got my HV3 insert today, going to install it ASAP

Filled it with gas. Floored it on an on-ramp under an overpass with the sunroof open. It made me smile :D

Cursed it for a while. Waiting till pay day to get the funds to get the o2 again. Then gonna yell at advanced for a shifty maf

Android Fire

Started using Turtle Wax Black Box, only have trunk lid done so far but I am impressed already. Hides the hideous swirl marks very nicely.

Set up a date with the tint man...
next wed at 8am,
now time to pull the rear deck

painted gpos. waiting on the mesh grille to arrive,
4 coats paint, 4 coats clear, wetsand, polish :)
https://fbcdn-sphotos-a.akamaihd.net...02125429_n.jpg

Took the spoiler off and buffed/waxed the faded ring that sits all the way around the border of the spoiler on the trunk lid.... so annoying..

Fixed the P0300 code.....every spark plug was cracked in some spot...lol

Quote:

---

Originally Posted by SerenityGTP

Fixed the P0300 code.....every spark plug was cracked in some spot...lol

---

fvckin failure.


:th_nanana:

Quote:

---

Originally Posted by SerenityGTP

Fixed the P0300 code.....every spark plug was cracked in some spot...lol

---

OOPS!

Wondered why I didn't put air in the tire. Almost flat again

Filled the gas tank up, courtesy of the company credit card

After work, i might wash her if its not raining.

Last night I tore apart the whole top end. Got most of it back on last night too.