What did you do to your Car today?

so it took 12.830 to fill the tank back up, and that comes to 12.2 mpg avg. and that blows a donkeys dick.

Quote:

---

Originally Posted by loopy smurf

Stuff a chunk of wood in the passenger side springs? :D

---

Hey now, I have special recent experience with using wood. :D

Quote:

---

Originally Posted by REDCOMPG

Have a fat girl sit on your lap until they settle enough?

---

Or get freaky with said fat girl until they settle?

Quote:

---

Originally Posted by Southerngoodness

So I'm looking to replace my ac compressor on my 98 gtp wat other year grand prixs will have an ac compressor that will fit?
Sent from my iPhone using Tapatalk

---

Any 97-03 GP air compressor will work but trust me it's worth it to get a new one from advance versus pulling a junkyard one, cause you'll have to crawl under the car to reach it. They're like $130 at advance versus 200 at autozone or oreilly's.

Quote:

---

Originally Posted by hensleya1

Hey now, I have special recent experience with using wood. :D



Or get freaky with said fat girl until they settle?



Any 97-03 GP air compressor will work but trust me it's worth it to get a new one from advance versus pulling a junkyard one, cause you'll have to crawl under the car to reach it. They're like $130 at advance versus 200 at autozone or oreilly's.

---

The thing is I have no problem doing it myself plus the junkyard here will let me bring it back if it doesn't work and get another one, also wat do I need to evacuate the freon that's already in there


Sent from my iPhone using Tapatalk

you can crack a line and stand back.

Ya but I'm not to fond of replacing ac lines XD


Sent from my iPhone using Tapatalk

I meant crack it open as in loosen up the line to the compressor. Or you can buy a vacuum pump and pump it out.

He means crack a line loose.

You can always take the car to a garage to does AC service and have them evacuate the system properly, then do the swap, then go back to the shop and have them put your freon back in and top it off.

O ok thanks y'all for the advice


Sent from my iPhone using Tapatalk

Or you could open the low port and let it hiss out. Also it will be cold anyway purge the system just fyi

yes, lets all encourage the guy to dump r134a into the atmosphere.. no it isn't as bad for the ozone layer as r22, and r12 were but still.. its not good..

accidents happen sure, but intentional, no cool...

Its not the rest of us have fancy recovery system like you mr. So we make do. If he was ohhhh idk an ac repair person then maybe I would expect more... just saying

shoulda seen the nice big cloud i let go today HAHA had to clear the gauges. LoL

[IMG]https://farm6.staticflickr.com/5318/...469c08cc_o.jpg decided to wash and throw a new hood on...wind deflector needs to go tho..

Quote:

---

Originally Posted by Mad Monkey

shoulda seen the nice big cloud i let go today HAHA had to clear the gauges. LoL

---

Nobody cares about your farts jordo

I put a Reptile tuned PCM in the 97 GTP. <--easy
Also changed out the door speakers and the 6x9's.

Quote:

---

Originally Posted by 02NavyBlue

Did the smoke test on my intake to find that crankcase leak, using my fx fog machine and a hose going in the brake booster vac line. Right away smoke came out of the back side of the motor, I tried more smoke but couldn't get any more to come out which was weird. So I hooked the air compressor right up to the vac line with an air gun, and could feel the air coming out. Turns out that a bracket I removed from the LIM had a bolt that goes into the head. Little did I know that the bolt hole goes all the way through and into the valve cover area, so there was a bolt hole open to the crankcase, allowing water in when I sprayed the engine. So I got the bolt back, cleaned it up and rtv'ed it, and put it back. It's all good now. Then out of curiosity I put air in the intake afterwards to check for any other leaks, I heard one in the front of the engine, eventually finding out it was the oil filler cap o-rings don't seal well after a few psi is in it. Not a big deal to me.

---

Got a picture of said bolt? Just curious where it is to make sure I didn't take the same bolt out when I did Matts lim gasket.

It's the one in the middle of the head that holds a bracket or evap on.

Will a Buick with the same motor as a 98 Grand Prix have the same ac compressor


Sent from my iPhone using Tapatalk

it should be.

Check Rockauto to know for sure.