Thread: BlueNick's old heads/cam setup

Hmmmm Ok. So its a stage 3/4(ish) cam pretty much?

Similar yes. Just less lift and a little less duration than the IS4. That is if I remembered the duration correctly.

Hmmm... I'm going to have to find out if modified heads are going to be in the budget.. But I may be intereted in this cam.

Originally Posted by SnowTh1ef

Hmmm... I'm going to have to find out if modified heads are going to be in the budget.. But I may be intereted in this cam.

If it's the TEP race cam, the 3800 website "claims" you can buy their kit that allows for use with stock heads .....
it's great deal

There is absolutely no way you can run anymore than .530 lift on stock heads with a "kit"....

Ideally you'd want ported heads to get the full benefit. The heads I got from Nick were about equivalent to IS3 heads. Regardless. You'll need the valve guides machined to accommodate the extra lift. And 130# springs at the least

Originally Posted by SnowTh1ef

There is absolutely no way you can run anymore than .530 lift on stock heads with a "kit"....

I know right?
but it is a great deal for the cam

Big cam Business again. For those that haven't seen it.

I want this for the camaro lol. Gonna call around today and see what a shop will charge to clearance the heads and I'll diy port em...