Got asked a lot since I last sold these little over a year ago...
Was able to obtain one of the versions of the 3D cad file and work with a shop to tweak it to be complete and ready to go!
So... I have 50 wraps being made. I have everything to complete the kits currently. Just waiting on my batches of bars to come in.
Includes bolts, washers, nuts, support strap (these are now all extra long straps for people that have 3" intercoolers or other reasons to need longer)
Shop is doing 5 batches of 10. Taking ~2 weeks or so to get the 10 made.
I am taking $50 downpayments to hold you one. (Remaining $110 will need to be sent before shipping)
Complete price SHIPPED from 41018 , is $140.
Mini Speckle Black Powder Coated is $180 ( 2 in stock )
I accept paypal. Just PM me here, email steven.chesser@twc.com or find me Facebook to contact me.
These are direct fit for the GEN5 blower.
GEN3 require you to modify the blower case to fit.
Due to the design you need a fuel rail solution like PRJ, Aeromotive, ZZP rails, as the bar sits where the stock lines lay.
Biggest pulley size recommended is 3.25"
Any bigger and its way to tight of a gap and you will need to get crafty.
You also need an intercooler otherwise you will need to get crafty with your belt setup. I have seen people use it without an
intercooler and HBody tensioners and what not, but no idea what all really goes into that setup.
Once installed you will need to measure the strap, trim it to length needed, and drill a single hole in the strap to bolt it to the wrap bar.
( Will include printed instructions )
For most part, pretty straight forward install setup.
Some design aspects of the bar is the raised area near the pulley.
This is so you can easily run your intercooler and spark plug wires under it.
Bar itself is 6061/T6 Aluminum.
Support strap is Aluminum.
All bolts/washers are stainless. 3x of them being hex cap longer bolts.
Pulley is wide enough for the 8 Rib belt conversion setups.
As of this posting, I have 6 pre-sold and 4 unsold.
Some pictures from a previous owner with a GEN3
This was the original sale post from last year @ http://www.grandprixforums.net/threa...Belt-Wrap-Kits
