You probably got some sensors wet and ruined them. My bet is on the MAF being bad.
|
|
05-15-2011
You probably got some sensors wet and ruined them. My bet is on the MAF being bad.
OverKilled, HAI, Ported Throttle body, Ported intake, ZZP DP, Magnaflow, BMR ta's, GMPP STB's, CCS springs, tinted tailights, roof rails, TEP cool'r, G8 hood. Glass Gearbox.
05-15-2011
I've had a bad MAF sensor before actually changed it about two months ago and it didn't cause the engine ping. I've read that the knock sensor could cause a ping, do you know if any other sensors can cause this?
05-16-2011
All our sensors "should" be weather proof because of the seals.
Please give us more information. Did it all of a sudden make the noise when you hit the motor with cold water? If so, that might be an exhaust leak. Although that shouldn't cause a stall.
A bad bearing will often sound fine at cold start up when the oil is thicker/cool. As it thins and warms up, that's when you will have the symptoms.
Do us a favor, get a vid of the sound. Hood up, car idling and up to temperature. Then give it a quick rev and let it fall back to idle a couple of times.
05-16-2011
No it actually started the next day but I didnt drive the car after I cleaned it all up. I parked it and drove it the following day and thats when it started. Its a little upsetting because I just got my intake gasket changed and the radiator changed and just recently got it all painted too and now I'm having this problem after spending sooooo much money.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
