Thread: Exhaust Headers

Page 2 of 2 FirstFirst 12
Results 21 to 37 of 37
  1. #21 Re: Exhaust Headers 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    lets just say a stock pulley on a top swap is as strong feeling as a 3.4 on a l67. your not running a 3.4 with out a ic or corn. or lots of timing pulled form the tune.

    3.4 on my set up pre ic was 6ยบ kr at part throttle. i just took it off and put the stock pulley back on, to kill 6 degrees kr you need to pull way to much timing, and that was part throttle, not even close to wot.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  2. #22 Re: Exhaust Headers 
    GrandPrix Junkie ItHurtz's Avatar
    Join Date
    Feb 2011
    Location
    Antioch, IL
    Posts
    3,522
    Thanks (Received)
    4
    Likes (Received)
    17
    Dislikes (Received)
    2
    Quote Originally Posted by That SlowPontiac View Post
    so i should just do a 3.5 set up and call it a day? i mean im willing to dish the money to be fast
    then throw the sc in the garbage, you will never be "FAST" with it
    2000 GTPT Sold-brandonhall10 built trans
    2009 Challenger SRT8
    http://www.grandprixforums.net/threa...uestion.....no
    Expert at being gay.
    Reply With Quote  
     

  3. #23 Re: Exhaust Headers 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    a 3.4 seems to be the happy medium for power gain and work required. I would follow the receipe suggested in this thread, it is a winning combo. the power output of a properly built 3.2 car is going to wear on the transmission, and you will need some transmission work sooner than later, and any pulley smaller than a 3.4 is going to take a lot more work like a cam, which will take a decent mechanic all day to install, and the same thing with an intercooler, but if you want to go fast, then plan on spending about 1000 for a cam and all necessary parts or about 1000 for an intercooler and everything associated, do both and plan on spending 3000 for a built transmission.

    last year I was rocking a full size intercooler, xp cam, ported heads, headers, bigger injectors, bigger throttle body, bigger mass air flow sensor, and a good overkill tune, and I would estimate my power output at about 350 hp at the wheels, and I also had a built transmission that I bought used. I was running a 2.8" pulley. the problem is the power adder. the Eaton M90 generation 3 supercharger was designed and built to be cheap. the engineering for it took place in the 1980's era. so really any other power adder out there is going to make more power simply because of newer technology or better materials. I almost went turbo, but ended up selling my kit, and with how many turbo kits that are for sale now, you could ditch the supercharger and do a turbo for 1500 with just about everything included, and will be faster than most M90 supercharged cars.

    http://www.grandprixforums.net/threa...00-Powered-Car!!
    Reply With Quote  
     

  4. #24 Re: Exhaust Headers 
    SE Level Member
    Join Date
    Jul 2016
    Location
    Algonquin
    Posts
    11
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    i mean my full mod list will cost somthin like 8 or 10k
    Reply With Quote  
     

  5. #25 Re: Exhaust Headers 
    GrandPrix Junkie ItHurtz's Avatar
    Join Date
    Feb 2011
    Location
    Antioch, IL
    Posts
    3,522
    Thanks (Received)
    4
    Likes (Received)
    17
    Dislikes (Received)
    2
    and still run a 13.1 at max speed
    2000 GTPT Sold-brandonhall10 built trans
    2009 Challenger SRT8
    http://www.grandprixforums.net/threa...uestion.....no
    Expert at being gay.
    Reply With Quote  
     

  6. #26 Re: Exhaust Headers 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    up to 3 grand for a built tranny, and turbos set ups are going for 2000 used or less. but the last two cheap ones just sold. 1500 and 1600.

    full ic set up your looking at 800 ish new.

    injectors 150 or more.

    pulleys and hub roughly 50 a pulley, 45 for a hub.

    sd headers 220 new. or togs or zzp or wbs. all the rest cost hundreds more.

    ported heads as little as 100 bucks in tools for a diy pair. or up to a grand easy or more for ported heads from someone. or a shop.

    then theres cams, thats gonna run you a good 400 to 500 easy no matter what cam you run. turbo or blower cam.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  7. #27 Re: Exhaust Headers 
    Donating User Swiggles's Avatar
    Join Date
    May 2009
    Location
    Quincy, Mass
    Posts
    2,225
    Thanks (Received)
    0
    Likes (Received)
    3
    Dislikes (Received)
    0
    I'll join the fun lol

    I ran a 3.2 on stage 3 heads and is3 cam, Intercooled with a big phenolic IC.

    7* of knock on the dyno gave me 3 Pistons blown up.

    But first my top swap, IC, 1.9 rockers spun s rod bearing in after a week.

    Both instances I was not tuned.

    You'll feel more "power" with more timing and the correct pulley. Get over the pulley envy make the car reliable fast.
    No more GP 04 Impala SS Indy:
    Gen V 3.4โ€|FWI|N* TB lq4 MAF|1.9 Modded Rockers|F&R Plogs|ZZP 3" Catted DP|ZZP 2.5" Catback|
    Reply With Quote  
     

  8. #28 Re: Exhaust Headers 
    GT Level Member
    Join Date
    Nov 2015
    Location
    WI
    Posts
    182
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by That SlowPontiac View Post
    i mean my full mod list will cost somthin like 8 or 10k
    Was this a joke or are you really going to drop 10K on mods?
    Reply With Quote  
     

  9. #29 Re: Exhaust Headers 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    Quote Originally Posted by GTPNovak View Post
    Was this a joke or are you really going to drop 10K on mods?
    lol, $10k in a GP is the best way to spend money on an FBody or something else.

    That's just hysterical.

    I know because I've done it. Max laughs.
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  10. #30 Re: Exhaust Headers 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    I wonder if people even spent 10K in mod's on these things when they came out new. I'm sure most of the posters in this thread are well aware that a Camaro could be bought, money spent on mod's so it would run 10's, and cost a total of 10K
    Reply With Quote  
     

  11. #31 Re: Exhaust Headers 
    GTP Level Member
    Join Date
    Jun 2016
    Location
    Cleveland ohio
    Posts
    890
    Thanks (Received)
    1
    Likes (Received)
    9
    Dislikes (Received)
    0
    The Mod money adds up quickly, especially with a fully built transmission. I would rather spend money on mods for a car that can be driven in the winter also. Those Camaros, mustangs, challengers etc.... are parked 5 months out of the year here. even the stock ones people dare to drive in the winter here you usually see in a ditch, spun out at an intersection or stuck on a hill.
    2017 Buick Regal 2.0 Turbo (SOLD 2007 Grand Prix GT. Front and rear PLOGs, 1.8 roller rockers, CAI, HPTuned, 3.4 pulley, TEP transmission, 90# springs, rollmaster single chain, Impala front brakes d/s rotors.) Past (Pontiacs) Grand Prix- 97 GT, 03 GT, 04 GT, 04 Comp G, 78 Trans am, 92 Trans Am.
    Reply With Quote  
     

  12. #32 Re: Exhaust Headers 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    A 10k GP probably would be in a ditch too in the winter.
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  13. #33 Re: Exhaust Headers 
    GT Level Member
    Join Date
    Nov 2015
    Location
    WI
    Posts
    182
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I didn't think of it that way since i don't drive my GTP in the winter that is what my less then 10K Jeep is for.

    Quote Originally Posted by rickisrad View Post
    The Mod money adds up quickly, especially with a fully built transmission. I would rather spend money on mods for a car that can be driven in the winter also. Those Camaros, mustangs, challengers etc.... are parked 5 months out of the year here. even the stock ones people dare to drive in the winter here you usually see in a ditch, spun out at an intersection or stuck on a hill.
    Reply With Quote  
     

  14. #34 Re: Exhaust Headers 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    Quote Originally Posted by rickisrad View Post
    The Mod money adds up quickly, especially with a fully built transmission. I would rather spend money on mods for a car that can be driven in the winter also. Those Camaros, mustangs, challengers etc.... are parked 5 months out of the year here. even the stock ones people dare to drive in the winter here you usually see in a ditch, spun out at an intersection or stuck on a hill.
    I feel the same way, I live in South West Wyoming and we have already had snow on the ground several times this month. But, a Grand Prix will never reliably run a 10 sec 1/4 and still be driveable in the winter. you could buy a TEP trans with all the bells and whistles and spend under 4K. you could buy a new turbo kit that will max out the power handling capability of the trans for another 4K, and the car might run 12's. with used parts it would cost far less.
    Reply With Quote  
     

  15. #35 Re: Exhaust Headers 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    Quote Originally Posted by blueguy View Post
    A 10k GP probably would be in a ditch too in the winter.
    If it was just $10,750 they had spent, including wheels and damn good snow tires for the winter, then they'd at least be halfway in the ditch rather than all the way in the ditch. Lol

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

  16. #36 Re: Exhaust Headers 
    The Blue One blueguy's Avatar
    Join Date
    Jun 2008
    Location
    Dirtyzville, Missery
    Posts
    31,287
    Thanks (Received)
    1
    Likes (Received)
    2
    Dislikes (Received)
    0
    Quote Originally Posted by WarStryker13 View Post
    If it was just $10,750 they had spent, including wheels and damn good snow tires for the winter, then they'd at least be halfway in the ditch rather than all the way in the ditch. Lol
    I mean, yeah.

    If I put $10k in a car worth fifteen hundred bucks...I'd probably never drive it in the snow.

    But that's just common sense; or you don't care.

    Either way I still lol
    Sold WBody's: '03 Blue GTP/'98 Green GTP/'98 Silver GT/'05 GXP
    '99 Chevrolet Silverado Classic Z71 4x4 - K&N Intake/Gibson Exhaust #TRUCKTHINGS
    '12 Buick Regal Turbo - ZZP CAI/20% Tint/HID's
    '89 Ford Mustang LX Notchback - LM7 5.3, 4L80, 9", HX40
    '04 Chevrolet Corvette MRM A4/LS1 - TSP LT's, 3"O/R X, AFE S2 CAI
    Reply With Quote  
     

  17. #37 Re: Exhaust Headers 
    I break things. WarStryker13's Avatar
    Join Date
    Oct 2014
    Location
    Frederick, MD
    Posts
    2,690
    Thanks (Received)
    4
    Likes (Received)
    38
    Dislikes (Received)
    1
    Very true. I'm not going to put 10k, or even 5k into mine. I'll make it reliable, nice to drive, and fun. In that order. It's not going to be "fast", but I want to be able to stomp the gas and giggle a little, and still be able to drive it every day.

    I'll pick something else to make scary fast, something that will actually be worth the money it takes to get it there.

    04 GP GT2: Handling upgrades, go-slow parts, and an attitude. Totaled.
    87 Dodge Ram 50:​ Junkyard rescue, resurrection in progress.
    Reply With Quote  
     

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Headers Vs Exhaust Manifold
    By ledfo0t31 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 9
    Last Post: 04-30-2016, 01:58 PM
  2. best exhaust to go with sd headers
    By RideWithPride in forum General Grand Prix Discussion
    Replies: 20
    Last Post: 09-20-2012, 10:15 AM
  3. Where can I buy Headers and Exhaust?
    By h0wl0ngcanitbe in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 66
    Last Post: 03-13-2012, 11:22 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •