Thanks all for the input. As Scotty and Dealer said - I was thinking I had a bad pump also. What was bothering me was that this was the second new pump. I had installed one, didn't work, returned it and got another one, installed it and it didn't work. I had quadruple checked (even more) the wiring configuration on the new wiring harness provided with the pump. The old harness had A, B, C, and D posts. The new harness had A, B, C, and D posts. So that is how I wired it. Please note Delphi pumps do not provide a wiring guide with the pump. So after several hours of searching online last night for some information about wiring configuration for Delphi pumps, I found one image on google that showed the C and D posts switched. So I switched the C and D wires - and bingo - the pump works. Bottom line - if Delphi would have provided a wiring diagram with their pump it would have saved a warranty returned pump and me several hours of messing around troubleshooting / investigating.
Again thanks for all the posts.
About the crank sensor - yes I had a crank sensor go out on my Bonneville. Car would randomly die while driving down the road. I replaced the crank sensor - bingo - no more random dying.
